Download Print deze pagina

Before You Begin; For Your Safety - Lux Tools A-BS-20 Set Vertaling Van De Oorspronkelijke Gebruiksaanwijzing

Advertenties

GB
Table of contents
Before you begin... . . . . . . . . . . . . . . . . . . . . . .  26
For your safety  . . . . . . . . . . . . . . . . . . . . . . . . .  26
Your unit at a glance   . . . . . . . . . . . . . . . . . . . .  29
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29
Cleaning   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . .  31
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  31
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . .  31
Claims for defects   . . . . . . . . . . . . . . . . . . . . .  102

Before you begin...

Intended use
This device is only intended for non-commercial use
as a screwdriver for screwing and removing screws
as well as for drilling into wood, metal, plastic and soft
brickwork.
This product is not intended for commercial use. Gen-
erally acknowledged accident prevention regulations
and enclosed safety instructions must be observed.
Only perform work described in these instructions for
use. Any other use is improper. The manufacturer will
not assume responsibility for damage resulting from
such use.
What are the meanings of the symbols used?
Danger notices and information are clearly marked
throughout these instructions for use. The following
symbols are used:
DANGER! Direct danger to life and risk of 
injury! Directly dangerous situation that
may lead to death or severe injuries.
WARNING! Probable danger to life and 
risk of injury! Generally dangerous situa-
tion that may lead to death or severe inju-
ries.
CAUTION! Possible risk of injury! Dan-
gerous situation that may lead to injuries.
NOTICE! Risk of damage to the device! 
Situation that may lead to property damage.
Note: Information to help you reach a better
understanding of the processes involved.
These symbols identify the required personal protec-
tion equipment:

For your safety

General safety instructions
• To operate this device safely, the user must have
read and understood these instructions for use
before using the device for the first time.
• If you sell or pass the device on, you must also
hand over these operating instructions.
26
General power tool safety warnings
Tran slation of the original instructions
Cordless drill set
• Save all warnings and instructions for future 
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive 
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools cre-
ate sparks which may ignite the dust or fumes.
• Keep children and bystanders away while 
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power 
tool. Keep cord away from heat, oil, sharp 
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
• When operating a power tool outdoors, use an 
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
• If operating a power tool in a damp location is 
unavoidable, use a residual current device 
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use 
common sense when operating a power tool. 
Do not use a power tool while you are tired or 
under the influence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always 
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
WARNING! Read all safety warnings, 
instructions, illustrations and specifica-
tions provided with this power tool. Fail-
ure to follow all instructions listed below may
result in electric shock, fire and/or serious
injury.

Advertenties

loading

Gerelateerde Producten voor Lux Tools A-BS-20 Set

Deze handleiding is ook geschikt voor:

196069