Advertenties
• The permitted revolutions of the tool must be
at least as high as the highest revolutions
specified on the power tool. Accessories that
rotate faster than they are permitted to may break
and fly and thus cause injuries.
• Remember that moving parts may also be located
behind ventilation and venting slots.
• Symbols affixed to your unit may not be removed
or covered. Information on the unit that is no
longer legible must be replaced immediately.
Before putting the unit into operation, read
and observe the instructions for use.
Risk of damage to the eyes! Never look
directly into the LED.
Only re-charge the battery pack indoors.
Do not dispose of a battery pack with the
household waste!
Do not dispose of a battery pack in water!
Do not burn the battery pack!
Do not expose the battery pack to sunlight
or increased temperatures!
MAX xx °C
MAX xx °C
Risks caused by vibrations
CAUTION! Risk of injury due to vibra-
tions! Vibrations may, in particular for per-
sons with circulation problems, cause dam-
age to blood vessels and/or nerves.
If you notice any of the following symptoms,
stop working immediately and consult a doc-
tor. Numbness of body parts, loss of sense
of feeling, itching, pins and needles, pain,
changes in skin colour.
The vibration values specified in the technical data
represent the main uses of the device. The actual
existing vibrations during use may deviate from these
as a result of the following factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following
the tips below:
– Maintain the device in accordance with the
instructions in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your
hands, in particular, are kept warm.
– Take regular breaks and move your hands at the
same time to promote circulation.
Personal protective clothing
Wear goggles when working with the device.
Wear ear defenders when working with the
device.
When working with tools that cause consid-
erable dust, wear a dust protection mask.
Do not wear protective gloves when working
with the device.
Wear tight fitting clothes when working with
the device.
If you have long hair, cover or wear a hair
net.
Your unit at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
► P. 3, fig. 1
1. Tool holder
2. Torque regulator
3. Revolution switch
4. Rotation direction switch
5. On/Off switch
6. LED
7. Battery pack
► P. 3, fig. 2
8. Display for remaining capacity
9. Push button for capacity display
10. Locking button
11. Control lights
12. Battery charger
Scope of delivery
• Operating manual
• Cordless drill set
• Battery charger
• Battery pack
• Screwdriver bit
Operation
Charging the battery pack
WARNING! Risk of injury! Comply with all
safety instructions when handling recharge-
able devices.
NOTICE! Risk of damage to the unit! Do
not allow the battery pack to deep dis-
charge.
Note: The Li-Ion battery pack can be
charged at any time without affecting the
lifetime of the unit. Interrupting the charging
process will not damage the battery pack.
• The battery pack must be charged prior to the first
start-up (charging time: ► Technical data –
p. 31).
GB
29
Advertenties
Hoofdstukken
