Inhoudsopgave
Advertenties
9.
Guide the camera cable into the vehicle interior.
10. Screw on the camera and the camera bracket using the included self-tapping screws or M3 x 20 mm thread-
ed screws.
NOTE Depending on the thickness of the construction, longer threaded screws are required.
7.5
Installing the controller
NOTICE! Risk of overheating
Do not install the controller in a location exposed to direct sunlight.
NOTE
Ensure that the back of the controller is accessible after installation and that there is enough
space to insert an SD card (see
If an flash drive is to be used to store the video data, move the USB input (Fig. , 4) to an
easily accessible location.
1.
Install the controller in a place protected from water near the monitor, e.g, under the dashboard or under
the driver's seat (Fig. , 3).
2. Fasten the controller with the bolts supplied.
Fig.
on page 9
7.6
Inserting an SD card
1.
Unscrew the SD card cover from the controller.
Fig.
on page 10
2. Insert 1 or 2 SD cards.
3. Screw the SD card cover to the controller.
7.7
Installing the IR receiver
1.
Choose a location where the IR receiver (Fig. , 1) is within sight of the remote control.
Fig.
on page 11
2. Attach the IR receiver with the supplied double-sided adhesive tape.
20
Inserting an SD
card).
Advertenties
Inhoudsopgave
