Inhoudsopgave
Advertenties
9. Dust container and
filters
CAUTION:
During vacuuming, all filters and the
dust container 8 must be assembled at
all times.
Every operation requires the dust contain-
er 8 and all filters to be inserted:
-
the metal filter 10 inside the dust con-
tainer 8,
-
the paper filter 13 inside the filter carri-
er 12,
-
the motor protection filter 15 on the pa-
per filter 13,
-
the exhaust air filter 18 at the top of the
suction device 2.
9.1
Assembling the dust
container
9
8
• To remove, turn the dust container 8 an-
ticlockwise and then pull it off down-
wards.
• Place the dust con-
tainer 8 onto the suc-
tion device 2 in such
a way that the arrow
above the open pad-
lock symbol points to
the
9 marking.
• Turn the dust contain-
er 8 clockwise until it
clicks into place.
Now the arrow
above the closed
padlock symbol
points to the
9
marking.
9.2
Emptying the dust
container
14
11
• To lock the flap 11, close it again until it
audibly clicks into place.
9.3
Paper filter (HEPA)
The paper filter 13 sits inside the filter carri-
er 12.
• Remove the paper filter 13 by pulling it
out upwards using the small handle in
the middle.
13
12
• To empty the dust
container 8, you do
not need to remove it
from the suction de-
vice 2.
• Hold the suction de-
vice above a waste
container and then
press the button 14
to open the flap 11
at the bottom of the
dust container 8.
• To insert, place the
paper filter 13 into
the filter carrier 12
from above.
GB
33
Advertenties
Hoofdstukken
Inhoudsopgave
