AEG FSB32610Z Gebruiksaanwijzing pagina 46
Verberg thumbnails
Zie ook voor FSB32610Z:
- Gebruiksaanwijzing (52 pagina's) ,
- Gebruiksaanwijzing (52 pagina's) ,
- Gebruiksaanwijzing (44 pagina's)
Inhoudsopgave
Advertenties
46
www.aeg.com
Problem and alarm code
You cannot activate the appliance.
The programme does not start.
The appliance does not fill with water.
•
The indicator
intermittently.
•
Acoustic signal sounds 1 time in‐
termittently.
The appliance does not drain the wa‐
ter.
•
The indicator
intermittently.
•
Acoustic signal sounds 2 times in‐
termittently.
The anti-flood device is on.
•
The indicator
intermittently.
•
Acoustic signal sounds 3 times in‐
termittently.
Malfunction of the water level detec‐
tion sensor.
•
The indicator
intermittently.
•
Acoustic signal sounds 4 times in‐
termittently.
Malfunction of the wash pump or the
drain pump.
•
The indicator
intermittently.
•
Acoustic signal sounds 5 times in‐
termittently.
Possible cause and solution
•
•
•
•
•
•
•
flashes 1 time
•
•
•
•
•
flashes 2 times
•
•
•
flashes 3 times
•
•
•
flashes 4 times
•
flashes 5 times
Make sure that the mains plug is connected to
the mains socket.
Make sure that there is no damaged fuse in
the fuse box.
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or
wait for the end of the countdown.
The appliance recharges the resin inside the
water softener. The duration of the procedure
is approximately 5 minutes.
Make sure that the water tap is open.
Make sure that the pressure of the water sup‐
ply is not too low. For this information, contact
your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not
clogged.
Make sure that the inlet hose has no kinks or
bends.
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not
clogged.
Make sure that the drain hose has no kinks or
bends.
Close the water tap.
Make sure that the appliance is correctly in‐
stalled.
Make sure the baskets are loaded as instruc‐
ted in the user manual.
Make sure that the filters are clean.
Switch the appliance off and on.
Switch the appliance off and on.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
