Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Inserting/removing the scale filter insert
The spout of the kettle is fitted with a scale filter 6 insert, which can become
clogged with particles or scale over time. To clean the scale filter 6 insert,
simply remove it from the appliance.
1) Open the lid.
2) Inside the jug, press the protruding tab on the scale filter insert 6 slightly
downwards so that the scale filter insert 6 can be removed.
3) Clean the scale filter insert 6 with a slightly moistened dishcloth and under
running water.
4) First, place the scale filter insert 6 with the lower lock in the recess inside the
kettle. Press the protruding tab on the scale filter insert 6 slightly downwards
and slide it under the holder. Ensure that the scale filter insert 6 clicks into
place properly.
NOTE
If scale deposits have solidified in the scale filter insert 6, place the filter in
►
a water-vinegar solution with a ratio of 6:1 for a few hours. The scale de-
posits will dissolve. Rinse the scale filter insert 6 with plenty of fresh water.
Storage
■
Allow the appliance to cool down completely before putting it into storage.
Wind the power cable around the cable winder 5 under the base 4.
■
■
Store the appliance at a dry location.
■
24
│
GB │ IE
SWKE 3100 B1
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
