Inhoudsopgave
Advertenties
HARC-SMS - Installation Manual
HARC-SMS - xxxxxxxxxxxxxxxxxx
8 8
5.2 DIP switch setting
Name
Function
SW1
Not available
SW2
Reset
SW
Not available
(TELE)
SW4
Available
SW5
Available
SW6
Available
SW7
Options 2
SW8
Options 1
(Application type)
SW9
Not available
SW10
Not available
SW11
H-LINK DSW
D4, D11
H-LINK
D7
Power
D9/D10
MODEM
D12
-
D1
Operation
Factory setting
Description
All in off (no function)
–
Reset button. To be used in case of program has been locked
Factory purposes. Never change it
–
Press for seconds for INFO sending (See chapter 6)
–
Press for 3 seconds for LIST sending (See chapter 6)
–
Press for seconds for CANCEL sending (See chapter 6)
SW7-1: Master (default) / Slave setting
SW7-2~6: All in OFF (no function)
SW7-7, 8: Feedback signal and its frequency. Disbled by default.
SW8-1: Packaged (default) / Chiller setting
SW8-2: Enable (default) / Disable communications
SW8-3, 4: SMS sending frequency (SMS repetition)
Default: Initial SMS sending frequency is 12h
SW8-5, 6: Period set for alarm advising
Default: Duration period is 1h
SW8-7: Mobile numbers configuration Disable (default) / Enable
SW8-8: OFF No function
All in off (no function)
All in off (no function)
2-Pins DSW
SW11-1: H-LINK end resistance
SW11-2: H-LINK fuse protection
–
H-LINK transmission
–
Power supply ON/OFF
-
Commnunication between Modem and RS22
-
Not used
-
Normal software operation
$
ATTENTION:
SIM card needs to be configured
externally by using a mobile phone. It is
necessary to disable the PIN No. SIM
card must be field supplied.
PMML0162A-rev.0 - 6/2008
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
