Advertenties
22
de
fr en
fi p t nl sv it es
4.
Maintenance
4.1
Cleaning
The charger's housing and display should only
be cleaned using a damp cloth and neutral
cleansers. Do not use any abrasive cleaning
detergent nor rough workshop cloths.
4.2
High-wear parts
Designation
Mains cable
Charger cable
!
If the charger cables or mains supply cable
have been damaged they must always be
replaced by original cables; these are avai-
lable from the after-sales department of the
manufacturer in question.
1 689 979 848 (2005-06-14)
Order number
1 684 461 158
8 784 443 052
5.
Technical Data
When the control is set to maximum battery
charging current and 230 V mains voltage, the
charging currents will record the following
values:
In 12 V-mode with 12 V charge voltage
the battery charging current is max. 140 A
arithm. and during a start-assist measure
(1 V / cell) the start-assist current is max.
250 A arithm.
In 24 V-mode with 24 V charge voltage
the battery charging current is max. 86 A
arithm. and during a start-assist measure
(1 V / cell) the start-assist current is max.
220 A arithm.
Designation
Charging characteristic
Maximum charge voltage
at setting > 15 °C
Maximum charge voltage
at setting < 15 °C
Charger cable: 3 m;
Function temperature range:
Mains rated voltage:
Mains rated frequency:
NetzsicherMains fu-
se system:ung:
Power consumption:
Battery nominal voltage:
Battery capacity:
Dimensions (W*H*D):
Weight:
Degree of protection
(DIN EN 60529):
Protective category
(DIN EN 61010-1):
Radio interference
suppression
Interference degree
of emission I
Workplace related
Noise emission value
(Lpa)onswert (Lpa)
BSL 2470
Specification
WU
2,3 V per cell
2,4 V per cell
16 mm
with fully
2
insulated charger
terminalsmm2
mit vollisolierten
Ladezangen
0 °C to 50 °C
230 V ±10 %
50 Hz
H 250 T 15 A
approx. 2600 VA
12 V / 24 V
36 Ah - 400 Ah
400*950*300 mm
approx. 29 kg
IP 20
I
VDE 0875
DIN 40839 or ISO
7637 Section 1
70 dB(A)
Robert Bosch GmbH
Advertenties
