Inhoudsopgave
Advertenties
3 EN-US English
2.
Charge the battery for 4 hours before starting the camera for the first time.
3.
Insert a memory card into the card slot.
Note Empty or use a memory card that has not previously been used in an-
other version or type of camera. The cameras may organize files differently
on the memory card. There is therefore a risk of losing data if the same mem-
ory card is used in different versions or types of cameras.
4.
Push the On/off button
5.
Aim the camera toward the object of interest.
6.
Adjust the infrared camera focus.
Note It is very important to adjust the focus correctly. Incorrect focus ad-
justment affects how the image modes work. It also affects the temperature
measurement.
7.
Push the Save button fully down to save an image.
8.
When you have completed the inspection, connect the camera to a computer
using the USB cable.
9.
Import the images into a FLIR Thermography software and create an inspec-
tion report.
3.7 View from the right
See Figure 2.1 View from the right, page 2.
1.
Knob to change the dioptric correction for the viewfinder.
2.
Hand strap.
3.
Digital zoom button.
4.
Save button (push fully down).
Note The infrared camera can be configured to autofocus when you push
the Save button half-way down. To enable the autofocus function of the Save
button, select
press = Autofocus.
2. This item is dependent on the camera model.
#T810138; r. AC/73673/73673; mul
to turn on the camera.
(Settings) > Save options & storage > Save button half-
2
7
Advertenties
Inhoudsopgave
