Download Inhoudsopgave Inhoud Print deze pagina

Symbols; General Power Tool Safety Warnings; Work Area; Personal Safety - VARO Powerplus POWXG1040 Vertaling Van De Originele Handleiding

Snoeizaag 12 v, 100 mm
Inhoudsopgave

Advertenties

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:
Wearing of protection
against noise is advised.
Always wear gloves.
Denotes risk of personal
injury or damage to the
tool.
Do not expose charger
and battery pack to
water.
Ambient temperature
40 °C max. (only for
battery).

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings
and instructions may result in electric shock, fire and/or serious injury. Save
all warnings and instructions for future reference. The term "power tool" in
the warnings refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
5.1

Work area

Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used whenever conditions require
will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools that have
the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
Copyright © 2024 VARO
POWXG1040
P a g e
| 4
Wearing eye protection is
advised.
Read manual before use.
In accordance with essential
applicable safety standards of
European directives.
Do not incinerate battery pack
or charger.
Use battery and charger only
in closed rooms.
www.varo.com
EN

Advertenties

Inhoudsopgave
loading

Inhoudsopgave