Advertenties
Beschikbare talen
Beschikbare talen
Operating manual SATA air star C
EN
2. Safety Instructions
Read and comply with all directions listed in the following. Non-compli-
ance or incorrect compliance can lead to malfunctions or severe injuries
and even death.
Before using the PPE breathing protection equipment, every user is
obliged to check the capacity of the air supply system, possibly also in
terms of the impact
on other users of the system.
The code "H" indicates that the compressed air feed tube is heat-resist-
ant. The code "S" indicates that the compressed air feed tube is antistatic.
Before operation, the user must proceed with a risk assessment regarding
possible harmful components in the workplace, e.g. nitrogen.
2.1. Requirements regarding personnel
The half mask may only be used by experienced skilled workers and
instructed persons who have thoroughly read and understood these oper-
ating instructions. Do not use the half mask when tired or under the influ-
ence of drugs, alcohol or medication.
2.2. Personal Protection Equipment
The half mask offers highly effective health protection during paint spray-
ing work and associated jobs in environments that pose a health risk. The
half mask is part of the personal protective equipment PPE in combination
with protective boots, protective overalls, protective gloves, and hearing
protection if necessary.
2.3. Requirements for the quality of the compressed air sup-
plied
The product may only be used if the supplied compressed air corre-
sponds to the prescribed regulations for breathing air. Country-specific
regulations must be checked and complied with by the operator.
Note: in Europe, DIN EN 12021 must be adhered to.
103
Advertenties
