Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
11. Operation
DANGER of burns!
During operation, the surfaces of the de-
vice may become hot. Do not touch any
hot parts of the device such as the air
outlet 21 on the back or the inspection
window 6.
Use the handle 11 to lift out the hot ro-
tating basket 12 / rotary spit 10.
Use oven gloves or potholders to touch
the hot accessories.
During frying, hot steam escapes from
the air outlet 21. Be careful not to put
your hands into the steam.
Do not move or transport the hot air fry-
er 1 while it is switched on.
11.1 Power connection
• When the device 1 has been installed
for the desired purpose, insert the mains
plug 20 into an earthed wall socket
which corresponds to the specifications
on the rating plate. The wall socket must
also be easy to reach after switching on
the device.
- All indications in the display 2 light
up briefly.
- An acoustic signal is heard.
- Then the symbol
button 31 will light up. The device is
in standby mode.
for the Start/Stop
11.2 The touch display
On the touch display 2 there are symbols
that only display certain functions, e.g. the
hot air symbol
23.
Other symbols (also) represent a button, e.g.
the Start/Stop button
tons' is used in this instructions for buttons
and keys to make the text easier to read.
11.3 Switching on/off
• Press the Start/Stop button
der to switch on the device 1 from
standby.
- The symbols in the display 2 are
shown.
- The set temperature and cooking time
are displayed alternately.
• Press the Start/Stop button
in order to start the device 1 with the se-
lected settings or the selected program.
- The hot air symbol
- The set temperature and cooking time
are displayed alternately.
- The cooking time is counted down.
- If necessary, the program symbol 33
is displayed.
• If you want to stop the process while the
device 1 is running, press the Start/
Stop button
31.
- The display 2 shows OFF.
- The fan continues to run and the hot
air symbol
- After approx. 20 seconds the fan will
stop and 5 signal tones are heard.
The device 1 is in standby mode.
Only the symbol
in the display 2.
Quick start function
After you have selected a program or car-
ried out manual settings, the device 1 will
start automatically approx. 5 seconds after
the last entry.
31. The term 'but-
31 in or-
31 again
23 flashes.
23 flashes.
31 can be seen
GB
43
Advertenties
Hoofdstukken
Inhoudsopgave
