Advertenties
Beschikbare talen
Beschikbare talen
Status
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
Fence
Use of the single arm fence allows precise cuts to be made along the edge of the workpiece, or strips
of even width to be cut.
The fence can be fitted on either side of the base plate.
Technical data
Product properties
Product generation
Rated voltage
Weight in accordance
with EPTA-Procedure 01,
without battery
Saw blade diameter
Saw blade disc thickness
Kerf width
Saw blade arbor size
Rated speed under no
load
Maximum cutting depth
Storage temperature
Ambient temperature for
operation
Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
Noise information and vibration values
The sound pressure and vibration values given in these instructions were measured in accordance
with a standardized test and can be used to compare one power tool with another. They can also be
used for a preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used
for different applications, with different accessory tools, or is poorly maintained, the data can vary.
This can significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is
switched off, or when it is running but not actually being used for a job. This can significantly reduce
exposure over the total working period.
*2276609*
01
21.6 V
3.0 kg
160 mm ... 165 mm
1.2 mm
1.6 mm
20 mm
3,500 /min
57 mm
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
2276609
Meaning
If a connected product can still be used, the
remaining battery capacity is below 50 %.
If a connected product can no longer be used,
the battery has reached the end of its useful life
and has to be replaced. Consult Hilti Service.
21.6 V
See the end of these operating in-
structions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
27
Advertenties
