Advertenties
Beschikbare talen
Beschikbare talen
9
TECHNICAL SPECIFICATIONS
WARNINGS: • All technical specifications stated in this section refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.a. reserves the right
to apply modifications to products at any time when deemed necessary, while maintaining the same intended use and functionality.
MODEL
Motor voltage [V]
Frequency [Hz]
Max gate length [m]
Max gate weight (kg)
IP protection rating
Operating temperature [C°]
Weight of motor [kg]
Speed [m/s]
Travel [mm]
Capacitor [mF]
Nominal current draw [A]
Maximum current draw [A]
Nominal power draw [W]
Maximum power draw [W]
Nominal force [N]
Maximum force [N]
Cycles (cycles/hour)
Control unit
Dimensions [mm]
CE Declaration of Conformity and declaration of incorporation of partly completed machinery
Declaration in accordance with the following Directives: 12004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note – The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. headquarters
and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been re-edited for edito-
rial purposes. A copy of the original declaration can be requested from Nice S.p.A. (prov. of Treviso) Italy.
Declaration number: 507/TOO
Manufacturer's Name: NICE s.p.a.
Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Person authorized to compile the technical documentation: NICE s.p.a.
Type of product: Telescopic motor for swing gates
Model / Type: TOO3000, TOO3024, TOO4500, TOO4524
Accessories:
The undersigned Mauro Sordini, as Chief Executive Officer, hereby declares under his own responsibility that the products identified above
comply with the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of
the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with follow-
ing harmonised standards: EN 61000-6-2:2005, EN 61000-6-4:2007
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed machinery:
• Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC
(recast), in accordance with the following harmonised standards:
• I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC
and that the following essential requirements have been satisfied: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7-
1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to submit pertinent information on the partly completed machinery to the national authorities, in response to a
motivated request, without affecting its intellectual property rights.
• If the partly completed machinery is operated in a European country with an official language other than the language used in this dec-
laration, the importer must include a translation with this declaration.
• The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to
the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards: EN 60335-1:2012; EN 60335-2-103:2003 +A1:2009
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Oderzo, 9 May 2014
TOO4500
TOO4524
230
24
50
DC
4.5
4.5
250
250
54
54
-20 to +50
-20 to +50
6
5.5
0.016
0.014
500
500
7
-
1.1
1.1
1.5
5
250
30
340
120
300
300
2000
1800
24
continuous
A60
MC424L
800 x 100 x 177 h 800 x 100 x 177 h 800 x 100 x 177 h 800 x 100 x 177 h
Revision: 0
Language: EN
TOO3000
TOO3024
230
24
50
DC
3
3
300
300
54
54
-20 to +50
-20 to +50
6
5.5
0.016
0.014
400
400
7
-
1.1
1.1
1.5
5
250
30
340
120
300
300
2000
1800
24
continuous
A60
MC424L
Mr. Mauro Sordini
(Chief Executive Officer)
English – 4
Advertenties
Hoofdstukken
