Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
!
WARNING
Incorrect measurement!
► A bump test and/or calibration must be performed each time the device is
opened. This includes any battery change as well as each sensor
replacement in the device.
NOTICE
Damage to components!
The gas detector contains components at risk of charging.
► Before opening the gas detector, make sure that the operator is earthed in
order to prevent damage to the gas detector. For example, earthing may be
ensured by an ESD workplace (electro static discharge).
NOTICE
Damage to the device!
When replacing the battery or the sensor, make sure that no components are
damaged or short-circuited.
► Do not use sharp objects to remove the battery or the sensor.
!
CAUTION
Danger to health. The sensor contains corrosive liquids. In case of leaks, avoid
contact with eyes and skin. In event of contact, rinse with plenty of water.
For further information on use of the Dräger sensor, please visit the following
link: www.draeger.com/sensorhandbook
The manufacturer's calibration certificate can be downloaded from
https://www.draeger.com/productioncertificates.
Maintenance
en
25
Advertenties
Inhoudsopgave
