Advertenties
Beschikbare talen
Beschikbare talen
Instructions for the user
8. Using the vitroceramic hob
During normal operations, the appliance heats up considerably. Caution should therefore be used.
Do not allow children to approach the appliance. Do not leave the vitroceramic hob unattended
while it is on.
8.1
General warnings
The first time it is heated, the vitroceramic hob may develop an acrid or burnt smell caused by oily
residue from manufacturing, which disappears completely after repeated use.
8.2
Switching on
Position the pan or pot with the food to be cooked inside it on the required
heating element.
Turn the energy regulator knob to the required setting (from 1 to 11). After a
few moments, the latent heat light corresponding to the selected heating
element switches on.
If the vitroceramic hob is used to boil water, once it has boiled, turn the
energy regulator knob to a lower setting to prevent the liquid in the pot from
boiling over and soiling the surface.
8.3
Switching off
After cooking, return the knob to position .
The vitroceramic hob features a latent heat light which reproduces in reduced scale
the position of the heating diameters. This light signals that the surface area is still hot.
Do not clean or touch the surface until the latent heat light has switched off.
115
Advertenties
