Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
VDP2301RGVLD10 - VDP2601RGYLD10 - VDP3801RGVLD10
simultaneously. If you set different addresses, each device will "listen" to a separate channel number.
Changing the settings of one channel will only affect the device in question.
In the case of the 10-channel laser projector, you will have to set the start address of the first laser
projector to 1, the second laser projector to 11 (10 + 1), the third to 21 (10 + 11) and so on.
•
DMX5 channel assignment
Channel
1
control mode
2
blanking & blackout
3
pattern
4
vertical move
5
horizontal move
6
vertical roll
7
horizontal roll
8
rotation
9
zoom in & out
10
point draw
6.2
SD Card controlled mode
•
Press the SD CARD mode switch [6] to select SD CARD controlled mode.
•
In SD CARD mode, a DMX address (and thus a controller) is still required.
SD card notes:
•
Only use high quality SD cards of well known brands to avoid reading errors.
•
Max. supported capacity = 2GB.
•
The card must be formatted as FAT16 file system. The card that comes with the device is already correctly
formatted.
•
Do not place files in sub-directories.
•
Do not place more than 260 files in the root directory.
•
File name length is limited to 8 characters (followed by the .ild extension).
•
5animated) files (shows) must be created using an appropriate ILDA software program (not included).
•
The root directory may contain 3 reserved files. Do not remove these files:
o CONFIG.DAT: contains setting information for the laser projector. See further for instructions on creating
and modifying this file.
o FLASHMP.BIN: control program for firmware updates
11/08/2011
DMX512
value
0--63
Sound control (channel 3~10 not used)
64--127
Auto mode (channel 3~10 not used)
128--191
DMX control
192--255
Auto mode
VDP2301RGVLD10
VDP3801RGVLD10
0--5
blackout
6--10
white
11--15
red
16--25
yellow
21--25
green
26--30
cyan
31--35
blue
36--40
purple
41--110
single colour (auto)
111--180
multi-colour (auto)
181--251
multi-colour (move)
251--255
bounded colour
0--255
124 patterns (0-255)
0--127
manual vertical move
128--191
auto down, speed up accordingly
192--255
auto up, speed up accordingly
0-127
manual horizontal move
128--191
manual right, speed up accordingly
192-255
manual left, speed up accordingly
0--127
manual vertical rotation
128--255
auto vertical rotation, speed up accordingly
0--127
manual horizontal rotation
128--255
auto horizontal rotation
0--127
manual rotation
128--191
auto clockwise rotation, speed up accordingly
192--255
auto anti-clockwise rotation, speed up accordingly
0--85
from small to large, speed up accordingly
86--170
from large to small, speed up accordingly
large ←→ small, speed up accordingly
171--255
0--255
0=nil / 1~255=faint ~bright
function
VDP2601RGYLD10
blackout
red
green
yellow
36--105
106--175
176--245
246--255
6
single colour (auto)
tri-colour (auto)
tri-colour (move)
bounded colour
©Velleman nv
Advertenties
Inhoudsopgave
