Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
WARNING
► If you notice that the device is sucking in liquids or powder, stop the vacuum operation
immediately by pressing the ON / OFF button.
► Then let the device run freely without contact with bags or canisters so that the
remaining liquid or powder can be pumped out of the pump.
► Then clean the device.
► We recommend freezing liquid or soft food before vacuum operation.
12.1 Overview
1. ON/OFF button with LED
2. Silicon gasket
3. Air outlet (must not be covered)
4. USB-port type C
12.2 LED and battery symbol
1. The LED lights up constantly white during the vacuum
operation
2. The device stops the vacuum operation automatically and
the white LED switches off.
3. The LED flashes red when the battery is weak and during
charging.
4. The LED lights up constantly white as soon as the battery
is charged.
12.3 Charging the battery
Charge the device at least every 3 to 6 months to ensure optimal battery function. Charge
the device fully before using it for the first time. To charge the device connect the USB
cable with USB charger and the USB port of the device. The charging process can take
about 4 hours.
► If the device is started unintentionally, when you are not performing a vacuum
operation, then the device switches itself off after approx. 2 minutes to protect its
battery.
12.4 Vacuuming a ZIP-bag
Put the food in the zip bag. Close the zip bag tightly with the help of a ZIP Locker and
check that the zip lock is closed properly.
Please note
18
Advertenties
Inhoudsopgave
Probleemoplossen
