Inhoudsopgave
Advertenties
Troubleshooting
If the chainsaw is not functioning correctly, troubleshoot the fault in the table below before
contacting our service centre (during the warranty period) or a qualifi ed repairman (once
the warranty has expired).
Problem
The engine won't start
The engine is losing
power
The chain is not
lubricated
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
•
Complaints
•
Replacement parts
•
Returns
•
Guarantee issues
•
www.schou.com
80
Possible cause
Water in fuel system
The engine is fl ooded
There is no spark
Air fi lter is dirty
Thefuel fi lter is blocked
Improper adjustment of
carburettor
The chain oil tank is
empty
The oil feed is blocked
The oil screw is
incorrectly adjusted
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
85
Solution
Empty fuel tank and fi ll with new,
fresh fuel
Unscrew the spark plug and wipe it
Check and adjust the electrode
distance of the spark plug, or replace
the spark plug and spark plug cap
Clean the air fi lter
Clean fuel fi lter
Adjust the carburettor
Refi ll the chain oil
Clean the oil feed
Adjust the oil screw
GB
Advertenties
Inhoudsopgave
