Inhoudsopgave
Advertenties
VisioCam LCD Video Chime System – Installation and Use
Thank you for choosing this Friedland product. Please carry out the following the instructions to ensure
correct installation and use, and keep these notes in a safe place for future reference.
Before you fix the door camera or receiver in a permanent place, make sure that you have tested the two units
and that the system works in the location you have chosen! (See 'Setting up', beginning on the next page.)
T H E VIS IO C AM S YS T EM
Your Friedland wireless video entry system uses radio
signals to transmit a video picture of the caller from the
door camera to the receiver. The system is expandible,
so you can install additional surveillance cameras, or
a second door camera if required. The system is also
compatible with Friedland Evo and Friedland Décor door
chimes, so that you can install an additional wire-free
door chime in larger premises. See 'Expanding Your
System' on page 8 for more details.
Receiver features for use with future
products (available mid-2006):
Scan button – enables the receiver to scan CCTV
■
type cameras
Microphone volume – controls the audio level from
■
cameras with a fitted microphone.
Door camera features
Infrared LEDs
– allows the camera
to 'see in the dark' in
monochrome
Camera lens
– views callers
Confidence light
– illuminates
when call button
is pressed to
reassure the caller
that the unit is
working
Light sensor
Name plate
– for displaying
– detects ambient
your name or
lighting and switches
camera from colour
other information
to monochrome in
low light
CHE CKI NG PAC K C ONTENTS
The following items are included in the pack:
Door camera transmitter unit
■
Receiver unit with LCD display
■
Mains power adapter
■
AV SCART connection lead
■
Four No.8 screws for wall mounting
■
Four wall plugs.
■
You will need:
6 x AA alkaline batteries for the door camera
■
A No. 2 crosshead screwdriver
■
A 6mm dia. masonry drill
■
A large flat bladed screwdriver
■
Receiver features
Tune selection
button
Camera base
– selects the
– removes for
chime tune for
wall mounting
the door camera
Tune selection
button
– for second
Call button
camera/push
– activates the
chime tune and
AV socket
camera
– to connect to
a TV set (optional)
Power-on indicator
DC power socket
– connects to the
external power adapter
G-2
Display
– screens the camera
image for approx. 30
seconds after the call
button is pressed
Antenna
– receives the
signal from the
camera
MIC volume
– for future use
Display brightness
Scan
Chime volume
Scan button
– looks for connected
CCTV-type cameras [future
Friedland product]
Advertenties
Hoofdstukken
Inhoudsopgave
