Daily Use - Progress PAI6000F Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor PAI6000F:
- Gebruiksaanwijzing (68 pagina's) ,
- Gebruiksaanwijzing (72 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
20 progress
Heat setting displays
Display
-
Residual heat indicator
Warning!
The risk of burns from
residual heat!
DAILY USE
Warning! Refer to the Safety chapters.
Activation and deactivation
Touch
for 1 second to activate or deac-
tivate the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sounds some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before you
use the appliance again, the cooking
zone must be cool.
• You use incorrect cookware. The symbol
comes on and the cooking zone de-
activates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
The cooking zone is deactivated.
The cooking zone operates.
The Keep Warm/STOP+GO function operates.
The Automatic Heat-up function operates.
The cookware is incorrect or too small, or there is no cookware on the
cooking zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Lock / The Child Safety Device operates.
The Power function operates.
The Automatic Switch-Off operates.
).
Description
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is hot
from the heat of the cookware.
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
,
-
— 6 hours
•
-
— 5 hours
•
— 4 hours
•
-
— 1.5 hours
The heat setting
Touch
to increase the heat setting.
Touch
to decrease the heat setting. The
display shows the heat setting. Touch
and
at the same time to deactivate the
cooking zone.
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the neces-
sary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch
. The symbol
the display.
comes on in
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
