Download Inhoudsopgave Inhoud Print deze pagina

Safety; Electrical Connections - SFA SANIFOS 110 Installatie-Instructie

Pompinstallatie voor afvalwater, voor ingraving of plaatsing
Verberg thumbnails Zie ook voor SANIFOS 110:
Inhoudsopgave

Advertenties

1. Safety

WARNING
All personnel involved with the installation, operation,
servicing and inspection of the SaniFos / SaniPump
must be suitably qualified for this work and must have
studied the installation manual to ensure that they are
conversant with the pump installation and safety regu-
lations.
If the personnel do not have the necessary skills they
should not attempt to install, operate, service or inspect
this pump.
This pump cannot be installed, operated, serviced or
inspected by Children or by people with reduced physi-
cal, sensory or mental capacity.

ELECTRICAL CONNECTIONS:

The electrical installation must be carried out by a quali-
fied electrical engineer. The device's power supply must be
connected to ground (class I) and protected by a high sensiti-
vity differential circuit breaker (30 mA). Devices without plugs
must be connected to a main switch on the power supply
which disconnects all poles (contact separation distance of at
least 3 mm). The connection must be used exclusively to pro-
vide the power to the product. If the power cord is damaged,
to prevent possible danger, it must be replaced by the manu-
facturer, customer service team or a similarly qualified indi-
vidual. Regulations: be sure to comply with the provisions of
the standard in force in the country of use (France: NF C 15-
100) concerning the protection volumes in a bathroom.
UK
113
113

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Sanifos 250Sanifos 500

Inhoudsopgave