Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
WG4024-WG5024-WG4000-WG4000/V1-WG5000-WG5000/V1 gear motor
Before using the automation for the first time, have the fitter explain the origin of the
residual risks, and dedicate a few minutes of your time to reading the instructions
manual and cautions for the user provided by the fitter. Keep the manual for any
future doubt and deliver it to any new proprietor of the automation.
CAUTION! –Your automation is a machine which faithfully performs your com-
mands; a wrong or improper use will make it dangerous:
– Do not command the movement of the automation if people, animals or
things are within its range of action.
– It is totally forbidden to touch parts of the automation while the gate or door
is moving!
– Transit is allowed only if the gate or door is completely open with the leaves
stopped!
• Children: an automation system guarantees a high level of safety, preventing the
movement in the presence of people or things with its detection systems, and guar-
anteeing an always predictable and safe activation. It is any case prudent to forbid
children to play close to the automation and, to avoid accidental activations, do not
leave the remote control within their reach: it is not a toy!
• The product is not designed to be used by people (including children) whose phys-
ical, sensorial, or mental abilities are reduced, or those without experience or knowl-
edge, unless they have been able to benefit, through intermediation of a person
responsible for their safety, of supervision or instructions regarding the use of the
product.
• Anomalies: As soon as you notice some anomalous behaviour by the automa-
tion, cut off the power to the system and unblock it manually. Do not attempt to per-
form any repair work, but ask the assistance of your trusted fitter: meanwhile the
system can work as an unautomated opening, once the gear motor has been
unblocked as described below.
The gear motor is equipped with a mechanical system which allows to open and
close the gate manually. These operations must be performed during electrical black
outs or operating anomalies.
IMPORTANT! – The gear motor must only be blocked or unblocked when the
leaf is stopped.
If there is an electric lock on the automation ensure the electric lock is unlocked
before moving the leaf.
A
1
3
II – English
Instructions and cautions for the user of the
UNBLOCKING AND BLOCKING THE GEAR MOTOR MANUALLY
• Maintenance: As with each machine your automation needs periodic mainte-
nance so that it can function as long as possible and in complete safety. Agree a
periodic maintenance plan with your fitter; Nice recommends maintenance every 6
months for normal domestic use, but this period may vary depending on the intensi-
ty of use: Any control, maintenance or repair work must be performed by qualified
personnel.
• Even if you consider yourself able to perform the work, do not modify the system
and the programming parameters or adjust the automation: it is the responsibility of
the fitter.
• The inspection, periodic maintenance work and any repairs must be documented
by the person who performs them and these documents must be kept by the owner
of the system. The only work you can perform and which we recommend doing peri-
odically is cleaning of the glass of the photocells and the removal of any leaves or
stones which may obstruct the automatism. To prevent someone activating the gate,
before proceeding, remember to unblock the automatism (as described below) and
to clean it only with a sponge slightly dampened in water.
• Disposal: At the end of the life of the automation, ensure it is dismantled by qual-
ified personnel and that the materials are recycled or disposed of according to local
regulations in force.
• In the event of breakage or black out: As you await for the fitter to perform the work
or for the electricity to return if the system is not equipped with buffer batteries, the
automation can still be used. It is necessary to manually unblock the gear motor (see
"Unblocking or blocking the gear motor") and move the gate leaf manually as
required.
UNBLOCKING the gear motor manually (fig. A):
01. Slide the protection membrane and insert the key turning it clockwise:
02. Pull the handle upwards, accompanying it:
03. At this point, manually move the gate leaf in the position desired.
BLOCKING the gear motor manually;
01. Close the handle and turn the key anti-clockwise;
02. Remove the key and close the protection membrane.
2
Advertenties
Inhoudsopgave
