Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
22 progress
min.
200 cm
Furniture alignment
Important! Make sure that the kitchen
furniture is aligned vertically and at 90° in all
directions.
Adjust the kitchen furniture doors before in-
stalling the appliance.
2
min.
200 cm
2
90°
90°
Important! Remove the furniture door
damper if possible, to provide free space for
the free movement of the appliance door.
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do the following steps:
1. Install the sealing strip.
a) Remove the strip cover.
b) Apply the adhesive sealing strip to
the appliance as shown in figure.
2. Install the appliance in the niche.
a) Push the appliance in the direction of
the arrows (1) until the upper gap
cover stops against the kitchen fur-
niture.
b) Push the appliance in the direction of
the arrows (2) against the cupboard
on the opposite side of the hinge.
min 1 mm
Advertenties
Hoofdstukken
Inhoudsopgave
