Advertenties
Beschikbare talen
Beschikbare talen
Bringing into use /Maintenance and cleaning / Service centre / Warranty
3. Release the trigger
6
Read off the filling pressure on the gauge
4. If the object is overfilled with air (air pressure
too high): Press the deflator valve
some air.
5. Press the lever of the valve connector
wards and pull the valve connector
valve.
6. After you finish work, disconnect the device
from the compressor.
NOTE: First disconnect the hose from the com-
pressor and only then disconnect the compressed
air supply hose from the device. This will ensure
that the compressed air supply hose does not
wave around in an uncontrolled manner.
Using accessories:
P ress the lever of the valve connector
insert the desired accessory
cap
into the valve connector
9
Presta valve, e.g. cycle tyre valve
Dunlop valve, traditional cycle tyre valve
TIP: Use the valve adapter
valves shown.
20 GB
All manuals and user guides at all-guides.com
to stop the delivery of air.
.
1
to release
3
down-
5
off the
5
and
5
to
or the
10
13
.
5
for the cycle tyre
13
Using the blow gun
Q
1. Screw an extension nozzle
gun
.
7
2. Press the trigger
to start the delivery of air.
6
3. Release the trigger
6
4. After you finish work, disconnect the device
from the compressor.
NOTE: First disconnect the hose from the com-
pressor and only then disconnect the compressed
air supply hose from the device. This will ensure
that the compressed air supply hose does not
wave around in an uncontrolled manner.
Maintenance and cleaning
Q
DANGER OF INJURY!
Always disconnect the device from the compressed
air source before you clean or maintain it.
The device requires no maintenance.
D o not use sharp objects for cleaning the device.
Do not allow any liquids to enter the device.
Otherwise the device could be damaged.
C lean the device frequently; for best results, do
this immediately after you have finished using it.
C lean the housing with a dry cloth.
Service centre
Q
Have your device
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
Note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
Warranty
Q
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
7
on to the blow
8
to stop the delivery of air.
Advertenties
Hoofdstukken
