Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
Daily use
Ignition of the burners
Always ignite the burners before posi-
tioning pots or pans.
To ignite the burner:
1. Push the relevant control knob com-
pletely in and turn it counter-clockwise
to the maximum position marked
2. Keep the knob pushed for about 5 sec;
this will allow thermocouple to heat up,
and the safety device to switch off, oth-
erwise the gas supply would be inter-
rupted.
3. After the flame is regular, adjust it as
preferred.
If after a few attempts the burner does
not ignite, check that the crown and its
cap are in correct positions.
.
1
Burner cap
2
Burner crown
3
Ignition candle
4
Thermocouple
Warning! Do not keep control knob
pressed for more than 15 seconds.
If the burner does not light after 15 seconds,
release the control knob, turn it into off posi-
tion and wait for at least 1 minute before
trying to light the burner again.
Important! In the absence of electricity You
can ignite the burner without electrical
device; in this case approach the burner
with a flame, push the relevant knob down
and turn it counter-clockwise to maximum
gas release position.
6
1
2
3
4
1
2
3
4
Advertenties
Hoofdstukken
Inhoudsopgave
