24 progress
USE OF DETERGENT AND RINSE AID
3
1
2
3
0
2 0
8
Use of detergent
To help the environment, do not use
more than the correct quantity of deter-
gent.
Follow the detergent manufacturer rec-
ommendations on the detergent pack-
aging.
Do these steps to fill the detergent dispens-
er:
1. Press the release button
8
lid
of the detergent dispenser.
2. Put the detergent in the dispenser
3. If the washing programme has a pre-
wash phase, put a small quantity of de-
tergent in the prewash detergent com-
3
partment
.
4. If you use the detergent tablets, put the
tablet in the detergent dispenser
5. Close the detergent dispenser. Press
the lid until it locks into position.
Different brands of detergent dissolve
in different times. Some detergent tab-
lets do not have the best cleaning re-
sults during short washing pro-
grammes. Use long washing pro-
grammes when you use the detergent
tablets to fully remove the detergent.
Use of rinse aid
Rinse aid makes it possible to dry the
dishes without streaks and stains.
All manuals and user guides at all-guides.com
5
4
A
-
+
6
7
2
to open the
1
1
The rinse aid dispenser automatically
adds rinse aid during the last rinsing
phase.
Do these steps to fill the rinse aid dispens-
er:
1. To open the rinse aid dispenser, turn
4
the cap
2. Fill the rinse aid dispenser
aid. The mark 'max' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam during the washing programme.
4. To close the rinse aid dispenser, put
the cap in position and turn it clock-
wise.
Fill the rinse aid dispenser when the in-
5
dicator
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector
decrease the dosage.
Using combi detergent tablets
These tablets contain agents as detergent,
.
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and
rinse aid dispenser.
Be sure that these tablets are applicable for
.
the water hardness in your area (refer to the
instructions on the packaging of the prod-
ucts).
1. Adjust the water hardness to the lowest
level. Refer to 'Setting the water soften-
er'.
2. Set the rinse aid dosage to the lowest
position. Refer to 'Use of detergent and
rinse aid'.
Using again separately detergent, salt
and rinse aid
1. Fill the salt container and the rinse aid
dispenser.
2. Adjust the water hardness to the highest
level.
counterclockwise
6
with rinse
becomes clear.
7
to increase or