Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Timer Duration setting can be changed at any time. During cooking, select the coo-
king zone for which you wish to change timer duration setting, i.e. activate it with the
sensor, touch
tions.
When the set cooking time has elapsed, you will hear an alarm beep. Touch any sen-
sor to mute it or the alarm will turn off automatically after 30 seconds.
If you want to cancel the timer ahead of time, activate the desired cooking zone by
touching its sensor (the power indicator will flash), then cancel the timer as follows:
•
touch and hold the
•
touch
•
simultaneously touch and hold
To cancel the Timer touch
for 3 seconds or touch
and use
to reduce the time to "00."
To cancel the Timer you can also simultaneously touch and hold
conds.
Minute Minder
Use Minute Minder to count down time. The Minute Minder does not affect the ope-
ration of cooking zones.
To set the Minute Minder:
•
Turn on the hob.
•
Touch
and set the Minute Minder duration by touching
to reduce duration.
i
The Duration setting can be changed at any time. To do this, touch
use
or .
When the set Duration has elapsed, you will hear an alarm beep. Touch any sensor to
acknowledge and mute it. The alarm goes off automatically after 30 seconds.
To cancel the Minute Minder touch
i
duration to "00." or, alternatively, simultaneously touch and hold
The Stop'n go function
The Stop'n go function simultaneously suspends operation of all cooking zones and
then resumes at the heat settings that were previously set.
In order to activate the Stop'n go function, at least one cooking zone must be in use.
Touch the
sensor. All cooking zone displays will show the
cooking zone is hot the
depending on cooking zone temperature (residual heat indicator).
To deactivate the Stop'n go function touch the
plays will show the heat setting that was previously set before activation of the Stop'n
go function.
The Stop'n go function pauses the Timer countdown
The Stop'n go function does not pause the Minute Minder countdown
and change the duration setting as per Timer setting instruc-
sensor;
to reduce the time to "00";
(heat setting indicator will flash), then touch and hold
to activate the desired cooking zone, then touch
symbol will flash alternately with the letter "H" or "h",
and .
, then touch and hold
sensor again. Cooking zone dis-
84
and
for 2 se-
to add duration and
and then
to reduce the
and .
symbol. When a
Advertenties
Inhoudsopgave
