Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Deactivate cooking zones
Deactivate cooking zone by doing one of the following:
•
Turn off the hob with the
•
Touch and hold the
•
Touch the heat setting slider sensor and slide your finger to the left to reduce
the heat setting to "00."
Turn off the appliance
The appliance operates when at least one cooking zone is on.
•
Turn off the hob with the
If a cooking zone is still hot, the relevant display will show the letter "H" or "h"
to indicate residual heat. For description of the symbol, see below.
Booster function "P"
The Booster Function increases the nominal power of the Ø 180 mm cooking zone
from 1600W to 2500W, the Ø 210 mm cooking zone from 2000W to 3000W, and
the Ø 160 mm cooking zone from 1400W to 2100W.
and Bridge cooking zone — from 3000W to 3700W.
•
Place the cookware on the desired cooking zone.
•
The cookware will be automatically detected and the relevant display
show flashing "00."
•
Touch the Booster sensor or slide your finger on the heat setting sensor to the
right to activate the Booster function. The display will show the letter "P."
Turn off the Booster function:
•
Touch the Booster sensor or slide your finger on the heat setting sensor to the
left to deactivate the Booster function.
Booster function can be activated for up to 5 minutes. Then power will be
reduced to 14 (nominal power).
Power will also be reduced to the nominal power, if any hob components
overheat.
You can reactivate the Booster function when the internal components cool
down to a safe temperature. This function will not start automatically.
When you take the cookware off the cooking zone when the Booster function
in on, a 5-minute countdown will not be interrupted.
sensor.
sensor for 3 seconds
sensor.
81
will
Advertenties
Inhoudsopgave
