Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Control Panel
•
Immediately after the appliance is connected to electrical mains, all displays
will light up briefly. Your appliance is then ready for use.
•
The induction hob is equipped with electronic touch control sensors, which are
operated by touching with a finger for at least 1 second.
•
Touching of a sensor is accompanied by a beep to acknowledge.
Do not place any objects on the sensors of the control panel. Make sure
that cookware is not placed beyond the outline of the cooking zone. If you
place cookware too close to the control panel or you cover any sensors, the
hob will automatically turn off for safety.
Turn on the appliance
Touch and hold the on/off
Hob indicates correct operation (active) when
cooking zone
If you do not set the desired heat setting of the cooking zone within 15
seconds of activating the appliance, it will turn off automatically.
Activate cooking zone and set the heat setting.
•
Turn on the hob with the
•
Place the cookware on the desired cooking zone.
•
The cookware will be automatically detected and the relevant display
show flashing "00." This means that the selected cooking zone is active and
you can set the power.
If there are two or more pans on the hob when it is turned on, the hob will not
activate the cooking zones automatically. You need to touch the sensor
corresponding to your desired cooking zone.
•
To select the desired heat setting slide your finger across the heat setting sen-
sor starting from the left (the display will show the selected heat setting).
•
The cooking zone operates.
The cookware detection and automatic cooking zone activation only works
for the first pan placed on the hob.
displays.
sensor.
80
sensor for at least 3 seconds. The
"00"
is shown on the
will
Advertenties
Inhoudsopgave
