Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION
Note! For each connection the protective earth (PE) conductor must be con-
nected to the terminal marked
1 The 220-240 V AC 50/60 Hz single
phase connection. Bridge the L1
and L2 terminals. Connect the
phase conductor to the L1 terminal
and tighten the bolt. Connect the
neutral conductor to the N terminal.
Connect the protective earth PE
conductor to the PE terminal (
2* The 220-240/380-415V AC 50/60
Hz two phase connection. Connect
the phase L1 conductor to the L1
terminal and the phase L2 conduc-
tor to the L2 terminal and tighten
the bolts. Connect the neutral con-
ductor to the N terminal. Connect
the protective earth PE conductor
to the PE terminal (
L1=R, L2=S, L3=T; N = neutral conductor terminal;
* NN terminals are internally connected, they need not be bridged
Inside the packaging you will find accessories necessary to connect the appliance to home electri-
cal system. Use the enclosed accessories to ensure the proper operation of the appliance. The
accessories include: Strain relief, bridge connection, 2 screws and connection terminal cover.
Install the strain relief using the provided screws.
In order to remove the cover, use a screw-
driver to pry the fastening tabs until the
cover pops off.
WIRING DIAGRAM
Danger! High Voltage!
.
1N~
).
2N~
).
L3
L2
L1
N N
L
N
L3
L2
L1
N N
L2
L1
N
= protective earth (PE) conductor terminal
Install the terminal cover by inserting it until it
snaps in place with a click.
74
Type/
Fuse
conduc-
protec-
tor cross
tion
section
HO5VV-
32 A
F3G4
3x4 mm²
PE
HO5VV-
16 A
F4G2,5
4x2.5 mm²
PE
Advertenties
Inhoudsopgave
