Advertenties
Beschikbare talen
Beschikbare talen
reset messages, and a general text location message. The text location
message usually contains the name and address of the monitored
premises. Each message can consist of up to 40 characters. If the
device sends an SMS message, the text alarm message and text
location message are transmitted together. The device can also send
text messages on the analog line.
Confirmation and abort functions
The called contact can confirm incoming voice messages on his phone
and abort further dialing procedures.
4 outputs
The device has four programmable outputs. They can be triggered by a
number of different system events. The outputs can also be switched
remotely over the telephone. The status of outputs 1 and 2 is shown
next to the display with colored LEDs. The outputs are negative
switching transistors.
Temperature sensor
The current ambient temperature can be shown on the display. Outputs
can be switched if the temperature falls below a set minimum or if a set
maximum temperature is exceeded.
Time and date
The device has an internal clock. The current time and date can be
shown on the display. The date and time are added to text messages
and entries in the event log.
Listening and speaking mode
In the listening and speaking mode, you can use the built-in
microphone and loudspeaker to listen in on your property and speak
into the microphone if needed.
Memo function
The device allows you to record short audio messages. This can be
done directly on the device locally or via remote access. The presence
of a message can be indicated on the display and by beeps. Triggering
of an input can also automatically trigger a recording. In the event of an
alarm, ambient sounds can be recorded.
Remote access by telephone
Enabling this feature allows you to dial in to the device through the
telephone network. This allows you to remotely switch outputs, use the
listening and speaking mode, listen to recorded messages or record
10 UK
Advertenties
