Advertenties
Beschikbare talen
Beschikbare talen
GSM
The device interacts directly with the GSM cellular network. The device
is not tied to any wireless provider. It can be operated with normal SIM
cards.
PSTN module
With this additional module, the device can also be operated on a wired
analog phone line.
8 inputs
The device has eight trigger inputs. Each input can be assigned to a
voice message and/or a text message (SMS). The device can also
send a voice message and/or text message (SMS) if the trigger of the
input has been reset. Normally you connect the inputs with
"communication" outputs or alarm outputs (sirens) of alarm control
panels. However, you can also connect other devices to the inputs,
such as smoke detectors or temperature sensors. The device allows
you to program the polarity of the trigger. The device can be triggered
with a positive or negative voltage potential. The voltage potential can
be applied or removed.
10 contact numbers
The device allows you to store up to 10 contacts. In addition to a
telephone number, each contact can be assigned a name and a
message type (text or voice).
Caution!
Do not use the device to call the police on emergency numbers (110,
112, 911, etc.). Observe the local regulations in this regard.
8 voice messages plus 1 location message
The device has a microphone and a loudspeaker. It allows you to
record and play back up to 8 alarm messages, 8 restore messages and
a general location message. The location message usually contains the
name and address of the monitored premises. Each message can be
up to 30 seconds long. When the device sends an alert, the alert
message and location message are transmitted together.
8 text messages plus 1 location message
The device can also send text messages via SMS (Short Message
Service). The device can store up to 8 text alarm messages, 8 text
9 UK
Advertenties
