Advertenties
Beschikbare talen
Beschikbare talen
Phone Line
Fault
Line OK
Remote Start
Remote Clear
Time changed
Supply Low
Supply OK
Auto Report
Log Cleared
No Ack Name
01
Call Fail Name
01
GSM Signal
Low
GSM Sig. OK
Call PSTN
Call GSM
Telephone line not available for more than 40 s
For the device, the telephone line is available
when the voltage on the a/b line > 3 V.
Telephone line back in normal state
Remote access established
Remote access ended
System date and system time have been changed
The supply voltage has fallen below the preset lower
voltage limit
The supply voltage has again exceeded the preset lower
voltage limit. The supply voltage is again in the normal
range.
Automatic test call
Event log was deleted
After a complete factory reset, the event log is
deleted.
No acknowledgment of the message by contact 1
Contacts 2–10 analogously
The contact name is displayed as programmed.
"Name 01" is the factory setting.
Call to contact 1 failed
Contacts 2–10 analogously
The contact name is displayed as programmed.
"Name 01" is the factory setting.
The GSM signal has dropped below the preset value for
the low end of the GSM signal strength.
The GSM signal has again exceeded the preset value for
the low end of the GSM signal strength. The GSM signal is
present and is again in the normal range.
Call being made over the analog telephone line
Call being made over the GSM network
51 UK
Advertenties
