Download Inhoudsopgave Inhoud Print deze pagina

AEG CL838MM Gebruiksaanwijzing pagina 50

Verberg thumbnails Zie ook voor CL838MM:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

50
www.aeg.com
1. Use Previous or Next to select the
bar of the ECOMETER dedicated to
the desired setting.
• The bar of the ECOMETER
dedicated to the chosen setting
flashes.
• The display shows the current
setting value.
2. Press OK to enter the setting.
• The bar of the ECOMETER
dedicated to the chosen setting is
on. The other bars are off.
• The current setting value flashes.
3. Press Previous or Next to change
the value.
4. Press OK to confirm the setting.
• The new setting is saved.
• The appliance returns to the basic
settings list.
5. Press and hold simultaneously
seconds to exit setting mode.
Water hardness
German de‐
grees (°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill indicator
active.
and
for about 3
French de‐
grees (°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
The appliance returns to the programme
selection.
The saved settings remain valid until you
change them again.
7.2 The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. Set the right level of the
water softener to assure good washing
results.
mmol/l
mg/l (ppm)
8.4 - 9.0
835 - 904
7.6 - 8.3
755 - 834
6.5 - 7.5
645 - 754
5.1 - 6.4
505 - 644
4.0 - 5.0
395 - 504
3.3 - 3.9
325 - 394
2.6 - 3.2
255 - 324
1.9 - 2.5
185 - 254
0.7 - 1.8
70 - 184
<0.7
<70
Regeneration process
For the correct water softener operation,
the resin of the softener device needs to
Clarke
Water softener
degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Multi-tabs containing salt are
not effective enough to
soften hard water.
level
10
9
8
7
6
1)
5
4
3
2
2)
1

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave