Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The control panel does
not work or is difficult
to operate.
The glass is scratched.
Buzzing sound
Whistling sound.
Blowing sound.
Creaking, humming or
crackling sound.
50
The buttons are locked.
There is a layer of water on
the panel.
You are using only the
top tip of your finger to
operate the buttons.
You have used pans or pots
with rough bottoms.
You've used an aggressive
cleaner or scouring pad.
Stains may look like
scratches.
A 1-phase cooktop can
handle less constant power
and gets short bumps all
the time.
The noise occurs between
the pan bottom and the
cooktop or between 2
adjacent cooking zones.
The built-in ventilation
system is contracted
to keep the plate from
overheating. It may
still remain on after the
cooktop is turned off.
This may be due to the
construction of your pan.
Different material in the
pan bottom may vibrate
against each other.
Unlock the panel.
Dry the panel thoroughly.
Use your entire fingertip to
press the buttons.
Use cookware with a
smooth underside and do
not slide it onto the plate
Use only mild or special
detergent and soft cloths
On the glass surface, stains
are easy to clean.
This is normal.
This is normal and is part of
induction. The noise should
decrease or disappear
when you turn it to a lower
heat setting.
This is normal. Do not
unplug it while the fan is
still on. The fan will turn off
by itself.
This does not indicate a
fault. If you find the noise
disturbing, you can buy
pans for induction made of
a different material.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
