Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note
◊ If you don't touch a button, the product will automatically turn off after 1 minute.
◊ While cooking, you can change the cooking setting at any time.
5.2 Switching off
1. Select the desired cooking zone by touching the corresponding box on the
control panel.
2. Select position 0. This can be done either by touching the number directly, or by
sliding your finger from right to left across the bar of numbers. When doing this,
touch the number bar for about 2 seconds before you start sliding.
3. Switch off the entire product by pressing and holding the power button for about
3 seconds.
ATTENTION!
◊ The sign "H" indicates which cooking zone is too hot to touch. The sign will
disappear when the cooking zone has cooled to a safe temperature
5.3 Boost function
1. Select the desired cooking zone by touching the corresponding box on the
control panel.
2. Press the booster button (B).
3. The power of the cooking zone is maximized and "b" appears next to the
corresponding cooking setting.
4. After 10 minutes, the booster stops automatically and the cooking zone switches
back to the previously selected cooking setting.
5. To cancel the booster or turn it off early, select the desired cooking zone and
press the booster button again.
6. If no cooking level is selected before using the boost function, after 10 minutes
cooking level 9 will switch on.
5.4 Warm-up function
1. Select the desired cooking zone by touching the corresponding box on the
control panel.
2. Touch cooking level 1 twice. A "c" appears next to the cooking zone selection
44
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
