Download Inhoudsopgave Inhoud Print deze pagina

Maintenance; Malfunction Explanation; Operation And Functioning Of The Charging Station - Ecotap Duo 2019 Handboek

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

(The cable can be inserted either through the back or through the existing
cable gland entry at the bottom of the station. If you do not use the cable
gland entry, please make sure it is properly sealed.)
Connect the cores to the relevant components as indicated.
Connect the phase wires* to the indicated L1 / L2 / L3 connecting terminals.
Connect the Null wire to the indicated Null terminal.
Connect the shield/ground wire to the indicated Ground terminal.
When fastening the cores, use the correct screwdriver and tighten to 3.5Nm
to 5Nm. Do not forget to attach the loose ground wire from the charging
station to the cover.

20. MAINTENANCE

Always disconnect the charging station from the power supply
and read the manual before performing maintenance or fixing
a malfunction.
Only products approved by the supplier can be used to repair or replace
components. Repairs and replacements should always be carried out by a
certified specialist.
Maintenance should always comply with and be carried out in accordance
with NEN3140 and NEN50110 low voltage EU regulations.
Check the charging station for leaks.
Check the connection of the main power cable and ensure a tight
connection of at least 3.5 to 5 Nm.
Treat any damage to the charging station with anti-corrosion paint.

20.1 Malfunction explanation

If the charging station is not functioning properly, please contact the
back office provider or contact another certified mechanic with the right
measuring and testing equipment with car simulation.

20.2 Operation and functioning of the charging station

Before connecting the charging station to power, the back
office provider must be contacted to allow the software to be
activated. The unique charging station number is required for
this.*
*Only applies to charging systems with registration.
As soon as registration has been completed, the charging station can be
used with any type of electronic transport charging card (EV charging card/
charging key) or another suitable fuel card (other options available).
18

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave