Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
13. INTRODUCTION
Thank you very much for selecting the Ecotap® wall-mounted charging
station. This manual describes the Wall Charging Station equipped with two
type 2 sockets of 22kW each.
This manual contains important information for the proper and safe
installation and use of this charging station.
The charging station is designed to supply power to vehicles equipped with
a modus 3 charging system in accordance with DIN EN 50556, IEC 61851-1
(edition2.0), VDE- AR-N 4102 appendix: 2012-04. The safest option is selected
in concordance with the car and installation to ensure the vehicle will be
charged quickly and safely.
The entire charging station complies with the 2014/35/EU directive
concerning harmonization of legislation concerning electric material within
certain voltage limits (rearrangement of all previously published versions).
This manual provides insight into how the charging station can be safely
installed and used. This manual has been compiled to ensure maximum
functionality and lifespan of the charging station.
This manual has been drawn up with great care. However, if anything
remains unclear, please contact your supplier before installing the charging
station.
Proper functioning of the charging station can only be guaranteed if the
installation is performed by an authorized or certified installer/technician.
If the charging station is not installed by a certified installer, this may have
consequences for the device's warranty.
Please read this manual carefully before installing and using the charging
station.
Store this manual with the charging station to ensure the instructions
and safety regulations are always available.
© Copyright
No part of this publication may be copied, reproduced or saved in a retrieval
system without Ecotap® B.V.'s prior written consent.
This is an English translation of the original manual, which was written in
Dutch.
14
Advertenties
Hoofdstukken
Inhoudsopgave
