Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.0 Change settings
5.1 Call user menu
To activate the users menu:
You push the OK button.
•
After which you enter the correct Pin code according to the image below
•
(standard factory setting is 1000).
with the and button you change the flashing figure.
•
you confirm this with the OK button and you jump to the next figure. After you push on
•
the OK button at the 4th figure and you enter the correct pin code, you enter the user
menu and you can change the temperature setting, the switch times, the exception days and
all the other settings.
When an incorrect pin code is entered the screen image pin code input remains visible and the
code jumps back to 0000.
Note!
When no button is pressed for the duration of 1 minute the OptiTherm+ display will
automatically leave the menu and go back to the main display.
5.2 User menu: change the temperature setting
To change the temperature setting you follow the images below:
In the user menu select the menu-item temperature and then push the OK push-button.
•
With the and button, select the mode of operation which you wish to change and
•
confirm this with the OK button.
The display jumps to the temperature setting of the chosen mode of operation. With
•
the and button, change the temperature setting and confirm this with the OK button.
Follow the steps above to change the other temperature settings.
When you are finished with changing the temperature settings:
After the last change you press the OK button to confirm this.
•
Then you push the ESC button to go back to the user menu again.
•
EN
11
Advertenties
Hoofdstukken
Inhoudsopgave
