Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Parts description
Light bulb
1
Lamp ring
2
Lampshade
3
Bulb socket
4
Lamp base (14142505L)
5
Tube (14142605L)
6
Screw thread (14142605L)
7
Technical data
Model no.:
14142505L / 14142605L
Operating voltage: 230–240 V∼, 50 Hz
Rated power:
LED E14 max. 5 W (changeable)
Protection class:
II /
IP rating:
IP20
Fitting:
E14
Safety
Safety advice
The right to claim under the guarantee shall be
rendered invalid in respect of damage caused by
the non-observance of these operating instructions!
No liability is accepted for consequent damage!
No liability is accepted for damage to property
or persons caused by improper handling or non-
observance of the safety advice!
To avoid danger to
life from electric shock
Every time before connecting the lamp the mains,
check it and the mains lead for damage. Never
use your light if you find it is damaged in any way.
A damaged light bulb means your life is at risk
from electric shock. If there is any damage, re-
pairs to be carried out or other problems related
to the light bulb, please contact the service centre
or a qualified electrician.
Introduction / Safety
In order to prevent hazards, if the outer flexible
cable of this lamp becomes damaged it may
only be replaced by the manufacturer, a service
representative of the manufacturer or a similar
specialist!
Before assembly, ensure that the mains voltage
available corresponds to the operating voltage
necessary of the light (see "Technical data").
Never let the lamp come into contact with water
or other liquids.
Always unplug the light from the mains prior to
assembly, disassembly, cleaning or if the light
will not be used for extended periods.
Never open or insert anything into electrical
fittings or equipment. Doing this sort of thing can
lead to a serious danger to life from electric shock.
To avoid danger
of fire and injury
CAUTION! RISK OF INJURY!
Check bulbs for damage immediately after un-
packing. Do not fit defective bulbs into the light. If
they are, contact the service point for a replacement.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Ensure the lamp has been switched off and al-
lowed to cool before you touch it. In this way
you will avoid the danger of burns. Bulbs give
off a lot of heat around the top of the lamp.
Do not cover the light or the mains plug with
objects. Excessive heat can result in a fire.
Never leave the lamp operating unattended.
Do not allow the lamp or the packaging materials
to lie around unattended. Plastic film or bags,
Styrofoam etc. can turn into dangerous toys for
children.
ATTENTION!
Do not look into the LED from a close distance
during operation.
Do not look at the LED with an optical instrument
(e.g. magnifier).
The light bulb is not suitable for ex-
ternal dimmers or electronic switches.
Only insert the light bulb in a dry
environment.
GB/IE/NI
7
Advertenties
Hoofdstukken
Inhoudsopgave
