Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PROBLEM
The control panel and indicators are not
working.
The appliance makes an exceptional
amount of noise.
The appliance stinks.
Water remains in the machine after a
wash.
6.2. PROBLEMS WITH CLEAN LAUNDRY
PROBLEM
Detergent remains in the laundry after
a wash.
The laundry turns grey.
Limescale builds up on the laundry.
The laundry stinks.
POSSIBLE CAUSE
There are problems in the electronic
connections.
Transport bolts have not been removed.
The appliance is not level.
The machine is placed on a thin floor
(for example a wooden surface).
The machine makes a lot of noise when pumping and centrifuging. This is normal.
You don't have to do anything.
The appliance must be cleaned.
The drain hose is clogged.
The drain is blocked.
POSSIBLE CAUSE
Use less detergent next time.
Too little detergent has been used.
The appliance must be cleaned.
61
SOLUTION
Remove the power cable from the
earthed socket and plug the power
cable back into the earthed socket.
Remove the transport bolts.
Level the appliance according to
section 3.8..
If possible, choose a location in the
corner of the room as much as possible.
This minimises vibrations.
Consider placing the appliance on a
solid floor (for example, a concrete
surface).
Clean the appliance according to
section 5..
Clean the drain pump according to
section 5.4..
Remove any blockages from the drain
hose.
Clear the drain.
SOLUTION
Too much detergent used
Use more detergent next time.
Clean the appliance according to
section 5., and/or run the hygiene or
baby care program.
Advertenties
Hoofdstukken
Inhoudsopgave
