Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. Press button 23 in order to select
another operating mode and to
terminate the air circulation
operating mode
15.4 Using the hose connection
Please note that the drain hose
•
attached to the dehumidifier may
not run above the position of the
hose connector on the dehumidifier.
Otherwise condensation can flow
back into the dehumidifier and
damage it.
Remove the condensation container
from the dehumidifier as described
in
the section on Emptying the
condensation container
1
Stick the drain hose on the hose
connection.
2
Guide the free end of the drain
hose into a suitable drain ir a
suitable container, into which the
condensed water is supposed to
drain.
3
Push the condensed water
container fully back into the
dehumidifier.
CAUTION
Property damage due to erroneous
operation!
Improper cleaning of the dehumidifier
can lead to damage.
CAUTION
If you handle the dehumidifier
improperly, you can damage it.
Switch off the dehumidifier and
•
unplug it from the mains before you
attach a drain hose to it or remove
one from it.
You can attach the enclosed drain
•
hose (29) to the hose connector
(27) of the dehumidifier and thus
drain the condensation from the
dehumidified air (see fig. C). In
this way there is no need to empty
the condensation container (3) and
you can operate the dehumidifier
continuously.
Page | 26
16 Cleaning
Do not use any harsh cleaning
•
agents, brushes with metal or nylon
bristles or any sharp or metallic
cleaning tools such as knives, a hard
scraper or the like.
These can damage the surfaces.
•
Clean the ventilation openings and
•
the filter regularly
(approx. every 2 weeks), in order to
•
avoid a deterioration in the
performance of the dehumidifier.
16.1 Cleaning the dehumidifier
Wipe the dehumidifier off from the
•
outside with a dry or slightly
dampened, well wrung out cloth.
Then rub the dehumidifier
•
completely dry.
Clean the ventilation openings.
•
Remove dust and contamination
•
from the ventilation openings with
the use of a suitable soft brush.
16.2 Cleaning the filter
Remove the filter mounting plate 7
•
/18 from the dehumidifier by -
carefully loosening it from the
locking mechanism and then pulling
it out downwards (see fig. C).
Remove the filter grate 34 and the
•
foam material filter 17 out of the
filter mounting plate (see fig. C).
Clean the filter grate, the foam
•
material filter and the filter
mounting plate with a suitable brush
or a suitable vacuum cleaner.
Insert the foam material filter and
•
the filter grate back into the filter
mounting plate.
Advertenties
Inhoudsopgave
