Advertenties
Beschikbare talen
Beschikbare talen
Storing the Machine in the
Vertical-Stow Position
During the mowing season or in the off-season, you
can store your machine in the vertical position to
minimize storage space.
DANGER
The vertical-stow position exposes the bottom
of the machine.
• Remove the battery pack and the
electric-start button before moving the
machine into the vertical-stow position.
• Do not transport the machine in the
vertical-stow position.
• Do not attempt to start the machine in the
vertical-stow position.
1.
Ensure that the cutting-height setting on the
machine is 92 mm (3-5/8 inches) or lower. If
it is not, lower it; refer to
Height (page
14).
2.
Disengage the handle locks
Figure 23
1. Handle lock disengaged
positions
3.
Fold the handle fully forward
Important:
Route the cables to the outside
of the handle knobs as you fold the handle.
4.
Engage the handle locks.
5.
Lift the front of the machine by the handle and
move it into a storage space
Adjusting the Cutting
(Figure
23).
g370560
2. Handle lock engaged
position
(Figure
23).
(Figure
24).
22
Figure 24
g367781
Advertenties
