Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6) Once finish setting up the programming mode, the
thermostat will work under programming mode ON even if the thermostat is turned
off. The heating device will be switched ON or OFF according to the programming
setting.
The thermostat will automatically turn off the heating device if a sudden drop in
11.
temperature in the room is detected.
Press FAV, set temperature will convert to favorite temperature, and it will convert again
12.
to week target temperature at the time when TIMER ON start to work.
The symbol
means heating, it only displays when room temperature is 0.5℃ (or more)
13.
lower than set temperature.
The backlight will be ON when press any button in the state of power-on.
14.
NOTES
1. All settings need to be re-set after battery replacement.
2. Alkaline battery is recommended. If ALL the buttons on the remote-controller are not
working, try replacing the batteries.
3. Please do change the batteries with new ones once the screen battery symbol gets
flashing, or else it may result in halted/stuck/not working.
4. Check if set temperature higher enough than room temperature first if the heater can not
be turned on by remote-controller.
5. If users want the weekly timer and temperature work, make sure the TIMER function has
been switched to ON by long press MODE setting; If users don't want it work, switch the
TIMER to OFF.
6. Do not cover or touch the temperature sensor which is at the top of the remote-controller.
7. Do put the remote-controller in a open normal room environment rather not inside a
drawer/pocket or under pillow/quilt etc.
8. Please do take out the batteries from the remote-controller if long time no use.
C: Instruction for Control and Operation Way C
Ⅰ. Product Description
17
18
79
Advertenties
Inhoudsopgave
