Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Step 2. Press ▲ button to adjust hour(+1hour/press) and press ▼ to adjust
Minute(+5minutes/press) to set the starting time of Program ①.
Step 3. Press the SET button once and OFF icon flashing on screen, Use ▲ Button to
adjust hour(+1hour/press) and press ▼ to adjust minute (+5minutes/press) to set the
ending time of Program ①.
Step 4. Press the SET button once again and set temperature icon flashing on screen,
Use ▲ or▼ button to set the desired temperature to be maintained for
program ①.
Step 5. Press the SET button to bring up Program ② of week days , repeat Step 2-5. And
users can set up Program ③ and ④ in similar manner.
Step 6. After finishing setting Program ④, press the SET button to bring up SAT and SUN
setting, repeat step 2-5 to set Program① ② ③ ④ of weekends.
1-7 Programming Mode
2)
You can program the thermostat everyday with setting 2 groups of time interval per day.
Once in 1-7 Mode, Press and hold the SET button for 3-5 seconds until Program icon ①
and MON is displayed with ON and Time icon flashing on screen, users can follow the
above step 2-4 to set On/Off time and desired temperature of Program ① and ② from
Monday to Sunday in sequence.
Tips:
1) The default starting time is 00:00, the ending time is
00:00, and the default operating temperature is 15 degrees.
2) If the user does not adjust the default On/Off time of
00:00, the programming settings is invalid.
3) Running time of Program ① ② ③ ④ should not be
overlapped, and the ending time value of each program must be later than the starting
time, otherwise setting is invalid.
4) In 5+2 mode, if you do not want to set a mid-day
Heating period(Program ② or ③ ), simply set the programs ② or ③ to a lower
temperature than default with very short intervals. An example is shown below.
5) The programmed time / temperature setting will be
restored with the next program entry in the memory.
16
78
Advertenties
Inhoudsopgave
