• Remove the protective film(on the front) before using.
• Be sure the usage voltage is between 220-240V, 50Hz, and power supply has been
strictly in accordance with IEC, left is null wire and right is live wire, and also well
grounded.
2
• The devices will draw more current than small appliances, so a separate 5A socket is
required.
• Do not use the device in potentially explosive rooms.
• Do not use the device in aggressive atmosphere.
• Set the device up in an upright and stable position.
• Let the device dry out after a wet clean. Do not operate it
when wet.
• Do not use the device with wet or damp hands.
• Do not expose the device to directly squirting water.
• Never insert any objects or limbs into the device.
• Do not cover or transport the device during operation.
• Do not sit on the device.
• This appliance is not a toy! Keep away from children and animals. Do not leave the
device unattended during operation.
• Check accessories and connection parts for possible damage prior to every use of
the device. Do not use any defective devices or device parts.
• Ensure that all electric cables outside of the device are protected from damage (e.g.
caused by animals). Never use the device if electric cables or the power connection
are damaged!
• The electrical connection must correspond to the specifications in chapter Technical
data.
• Insert the mains plug into a properly secured mains socket.
• Do not use the device when the socket or wire overloaded.
• Observe the device's power input, cable length and intended use when selecting
extensions to the power cable. Completely unroll extension cables. Avoid electrical
overload.
• Before carrying out maintenance, care or repair work on the device, remove the
mains plug from the mains socket. Hold onto the mains plug while doing so.
• Switch the device off and disconnect the power cable from the main socket when
the device is not in use.
• Do not use the device under any circumstances if any damages on the mains plug or
3
power cable. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified.
persons in order to avoid a hazard. Defective power cables pose a serious health risk.
• During the installation of the device observe the minimum distances from walls and
other objects as well as the storage and operating conditions specified in the
67