Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION AND SETTING
Power on the heater, press ON/OFF button on the remote-controller, then press button
1.
℃/℉ and MODE buttons at same time to pair the remote-controller and receiver until long
beep sound.
NOTE:
1) Pairing should be finished within 1 minute, or else you need to re-power on the
heater.
2) Please re-power on the heater if you want to pair with another remote-controller.
3) Before pairing please do power off those heaters which you don't want to pair.
4) Switch on receiver ON means it will disable the remote-controller. Do not turn it on if
you want to control the heater by the remote-controller.
Press ON/OFF button on remote-controller to turn on/off the heater.
2.
NOTE: If you press the ON/OFF button on the remote-controller to shut down or the
weekly shutdown time arrives, the display screen of the remote-controller will only show
room temperature and OFF, which only means that the receiver has turned off the heater,
not that the remote-controller itself has stopped working, and its internal time and
temperature are still calculated. And pressing the ON/OFF key again or weekly startup
time arrives will signal the receiver to turn on the heater.
Long press LOCK 3 seconds to lock/unlock the buttons.
3.
Press ℃/℉ button to convert the temperature display measurement unit.
4.
Long press TIME 3 seconds to set year, month, date and time with UP and DOWN buttons.
5.
Press UP and DOWN to set target temperature.
6.
Even during weekly timer on period, users can also press UP and DOWN to set a
temporary temperature which will convert to week target temperature at the time when
next TIMER ON start to work.
Press and hold FAV for 3 seconds until the set temperature icon flashes, press UP and
7.
DOWN to set a favorite temperature, short press FAV to confirm.
Press the MODE and TIME buttons simultaneously to select 5+2 or 1...7 programming
8.
modes.
Press and hold the MODE buttons for 3 seconds to turn the programming mode on or off,
9.
ON means open, OFF means close.
Press and hold the SET button for 3-5 seconds to enter into programming mode.
10.
Note: Programming mode has a time-out limit whereby if no buttons are pressed within
3-5seconds, it reverts back to the main screen.
5+2 Programming Mode
1)
You can program the thermostat to fit your lifestyle — week and weekend, plus up to 4
groups of time interval
per day.
Step 1. Once in 5+2 mode, Press and hold the SET button for 3-5 seconds until
Program icon ① and MON TUE WED THU FRI is displayed with ON and Time Icon
flashing on screen.
14
15
77
Advertenties
Inhoudsopgave
