Download Inhoudsopgave Inhoud Print deze pagina
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

MENUS

About
Unit Status, Owner Information, Network,
Power, and Device information. Owner
information can be entered via the web
interface.
Device Information
Displays information such as:
Serial Number
Firmware Version
UUID/MAC address
Sensors
Sensor cartridge information on each.
Browse each cartridge for:
Last date checked
Expiration Date
Type of gas sensor
Safe/alarm range
Date of Manufacture
Total run time
More information about each cartridge can
be found in the web interface.
Sensor Check Wizard
Follow the on-screen prompts to check the
calibration of your sensor cartridges.
Network Settings
Configure a WiFi connection or change
advanced IP settings.
When connecting the GX4
you may be prompted to enter the network
name (SSID) and the wireless password.
If you do not know these, contact your
network administrator or the documentation
that came with your wireless router.
The IP settings are set automatically by
default. To manually change the settings go
to the network settings menu and enter the
desired settings:
to a network
®
IP Address
Subnet Mask
Default Gateway
DNS Address
Date
To ensure continuity of the logs, the date is
automatically set by the server. The clock
has a dedicated 10 year battery.
Time
The time can be changed to display the
current time zone and day light savings
time. The logs are recorded in UTC/GMT
and display according to your settings.
Synchronize the Internal Clock
To correct the Time/Date of your GX4
Connect your GX4
must be connected in "Client Mode". See
p. 12 or contact RPB
Navigate to Menu  System  Time &
Units  Sync Time. Press "OK" to sync
the time.
Common errors:
Unit offline: Your unit is not connected to
a wireless network. Configure you unit
into Client Mode.
Unreachable: The GX4 was unable
to contact the time service over your
network.
Time error: The time received was
substantially different from the time on
your unit. Contact RPB
Note: After synchronizing the time, your
logs may appear out of order, but are still
recorded in the order the events have
actually occurred.
Units
The units of measure can be changed
between Metric and Imperial.
:
®
to the internet. It
®
for instructions.
®
.
®
21

Advertenties

Inhoudsopgave
loading

Inhoudsopgave