Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UNIT SETUP
MOUNTING TO A RADEX
FIGURE 3.1
Position the monitor so that the green
brackets on the back line up with the
mounting bracket on the side of the
RADEX
, turn clockwise until the monitor
®
clicks into place.
MOUNTING TO A WALL BRACKET
FIGURE 3.2
Use the wall bracket (P/N: 08-231) and
appropriate screws to secure the wall
mounting bracket to a suitable wall. The
countersunk holes are 7/32" (5mm) and the
smaller holes are 5/32" (4mm).
FILTRATION UNIT
®
FIGURE 3.3
Position the monitor so that the green
brackets on the back line up with the
mounting bracket, turn clockwise until the
monitor clicks into place.
13
Advertenties
Inhoudsopgave
